Configuring Wireless Broadcast (Cli) - Cisco Catalyst 3850 series Configuration Manual

Configuring Wireless Multicast
Command or Action
Step 5
end
Example:
Device(config)# end

Configuring Wireless Broadcast (CLI)

SUMMARY STEPS
1. enable
2. configure terminal
3. wireless broadcast
4. wireless broadcast vlan vlanid
5. end
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3 wireless broadcast
Example:
Device(config)# wireless broadcast
Device(config)# no wireless broadcast
Step 4 wireless broadcast vlan vlanid
Example:
Device(config)# wireless broadcast vlan 3
Device(config)# no wireless broadcast vlan
3
OL-32598-01
Purpose
Exits the configuration mode. Alternatively, press Ctrl-Z to exit
the configuration mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global command mode.
Enables broadcast packets for wireless clients. Default value is
disable. Enabling wireless broadcast enables broadcast traffic for
each VLAN. Add no in the command to disable broadcasting
packets.
Enables broadcast packets for single VLAN. Default value is
enable. Wireless broadcast must be enabled for broadcasting. Add
no in the command to disable the broadcast traffic for each VLAN.
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
Configuring Wireless Broadcast (CLI)
253