Configuration Examples For Pim Mib Extensions; Example Enabling Pim Mib Extensions For Ip Multicast; Additional References - Cisco Catalyst 3850 series Configuration Manual

Configuration Examples for PIM MIB Extensions

Related Topics
PIM MIB Extensions for SNMP Traps for IP Multicast, on page 189
Example Enabling PIM MIB Extensions for IP Multicast, on page 192
Configuration Examples for PIM MIB Extensions

Example Enabling PIM MIB Extensions for IP Multicast

The following example shows how to configure a router to generate notifications indicating that a PIM interface
of the router has been enabled. The first line configures PIM traps to be sent as SNMP v2c traps to the host
with IP address 10.0.0.1. The second line configures the router to send the neighbor-change class of trap
notification to the host.
snmp-server host 10.0.0.1 traps version 2c public pim
snmp-server enable traps pim neighbor-change
interface ethernet0/0
ip pim sparse-dense-mode
Related Topics
Enabling PIM MIB Extensions for IP Multicast, on page 190
PIM MIB Extensions for SNMP Traps for IP Multicast, on page 189

Additional References

Related Documents
Related Topic
Cisco IOS commands
IP multicast commands
Standards and RFCs
Standard/RFC
draft-kouvelas-pim-bidir-new-00.txt
RFC 1112
RFC 1918
RFC 2770
RFC 3569
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
192
Configuring PIM MIB Extension for IP Multicast
Document Title
Cisco IOS Master Commands List, All Releases
Cisco IOS IP Multicast Command Reference
Title
A New Proposal for Bi-directional PIM
Host Extensions for IP Multicasting
Address Allocation for Private Internets
GLOP Addressing in 233/8
An Overview of Source-Specific Multicast (SSM)
OL-32598-01