Constraining Ip Multicast In Switched Ethernet; Finding Feature Information; Prerequisites For Constraining Ip Multicast In A Switched Ethernet Network - Cisco Catalyst 3850 series Configuration Manual

Constraining IP Multicast in Switched Ethernet

•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and
feature information, see Bug Search Tool and the release notes for your platform and software release. To
find information about the features documented in this module, and to see a list of the releases in which each
feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Constraining IP Multicast in a Switched
Ethernet Network
Before using the tasks in this module, you should be familiar with the concepts described in the "IP Multicast
Technology Overview" module.
OL-32598-01
Finding Feature Information, page 111
Prerequisites for Constraining IP Multicast in a Switched Ethernet Network, page 111
Information About IP Multicast in a Switched Ethernet Network, page 112
How to Constrain Multicast in a Switched Ethernet Network, page 114
Configuration Examples for Constraining IP Multicast in a Switched Ethernet Network, page 117
Additional References, page 118
Feature History and Information for Constraining IP Multicast in a Switched Ethernet Network, page
119
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
6
C H A P T E R
111