Using Ttl Thresholds To Limit The Multicast Data Sent In Sa Messages - Cisco Catalyst 3850 series Configuration Manual

Using TTL Thresholds to Limit the Multicast Data Sent in SA Messages

Command or Action
Step 3
ip msdp sa-filter in {peer-address | peer-name} [list
access-list] [route-map map-name] [rp-list access-list |
rp-route-map map-name]
Example:
Device(config)# ip msdp sa-filter in 192.168.1.3
Step 4 Repeat Step 3 to configure incoming filter lists for additional
MSDP peers.
Step 5
exit
Example:
Device(config)# exit
Using TTL Thresholds to Limit the Multicast Data Sent in SA Messages
Perform this optional task to establish a time to live (TTL) threshold to limit the multicast data sent in SA
messages.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip msdp ttl-threshold {peer-address | peer-name} ttl-value
4. exit
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3.6E (Catalyst 3850 Switches)
224
Purpose
Enables a filter for incoming MSDP SA messages.
--
Exits global configuration mode and returns to
privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Configuring MSDP
OL-32598-01