Rack Mount Installation; Wall Mount Installation; Product Application - Interlogix ES3002-4P-4T User Manual

2. Place the gigabit Ethernet switch on the desktop near an
AC power source.
3. Provide adequate ventilation space between the gigabit
Ethernet switch and any surrounding objects.
Note:
When choosing a location, consider the
environmental restrictions (airflow) detailed under
"Specifications" on page 1.
4. Connect the gigabit Ethernet switch to 802.3af/802.3at
compliant power devices (PD) or other network devices.
a. Connect one end of a standard network cable to the
10/100/1000BASE-T RJ45 ports on the front panel of
the gigabit Ethernet switch.
b. Connect the other end of the cable to a network device
such as a printer server, workstation, router, etc.
Note: Connection to the gigabit Ethernet switch requires
UTP Category 5, 5e, or 6 network cabling with RJ45
connectors. For more information, see "Appendix:
Networking connection" on page 7.
5. Supply power to the gigabit Ethernet switch.
a. Connect one end of the power cable to the gigabit
Ethernet switch.
b. Connect the power plug of the power cable to a
standard wall outlet.
After the gigabit Ethernet switch powers up, the power LED
illuminates solid green.

Rack mount installation

Follow the steps below to install the gigabit Ethernet switch in a
19-inch standard rack:
1. Place the gigabit Ethernet switch on a hard flat surface,
with the front panel positioned forward.
2. Attach a rack-mount bracket to each side of the gigabit
Ethernet switch with the supplied screws as shown in
Figure 5 below.
Figure 5: Attaching the brackets
3. Secure the brackets tightly.
4. After the brackets are attached to the gigabit Ethernet
switch, use suitable screws to securely attach the brackets
to the rack, as shown in Figure 6.
4 / 8
Figure 6: Rack mounting
5. Follow steps 4 and 5 under "Desktop installation" on page
3 to connect the network cabling and supply power to the
gigabit Ethernet switch.

Wall mount installation

1. Locate a wall suitable for mounting the ES3002-4P-4T.
2. Install two screws on the wall.
3. Hang the ES3002-4P-4T on the screws from the wall.
4. Follow step 5 under "Desktop installation" on page 3 to
power supply to the gigabit Ethernet switch.
Note: Before mounting the device to the wall, check the
location of the electrical outlet and the length of the
Ethernet cable.
Figure 7: Wall mounting

Product application

Connecting the end node or switch
1. Place the gigabit Ethernet switch on a smooth surface or
fasten the mounting brackets purchased separately with
the provided screws in a standard 19-inch rack.
2. Connect the power cord to the power inlet socket of the
gigabit Ethernet switch and the other end into the local
P/N 1073337-EN • REV A • ISS 19JUL17