Combination Switch - Mercedes-Benz G-Class Operator's Manual

Hide thumbs Also See for G-Class:
Table of Contents

Advertisement

the ignition, the automatic headlamp cleaning
system is reset and counting is resumed from 0.

Combination switch

High-beam headlamps
:
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction of
arrow ; or ?.
To switch on the high-beam headlamps:
X
turn the light switch to the L or Ã
position.
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are switched on only when it is dark and
the engine is running.
The blue K indicator lamp on the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam headlamps:
X
move the combination switch back to its nor-
mal position.
The blue K indicator lamp on the instru-
ment cluster goes out.
High-beam flasher: pull the combination
X
switch in the direction of arrow =.
Hazard warning lamps
To switch the hazard warning lamps on/
X
off: press button :.
The turn signal lamps flash when the hazard
warning lamps are switched on. If you now
switch on a turn signal lamp using the com-
bination switch, only the turn signal lamp on
the corresponding side of the vehicle will
flash.
The hazard warning lamps automatically switch
on if:
an air bag is deployed or
R
the Emergency Tensioning Devices are trig-
R
gered, or
the vehicle decelerates rapidly from a speed
R
of above 45 mph (70 km/h) and comes to a
standstill
The hazard warning lamps switch off automati-
cally if the vehicle reaches a speed of above
6 mph (10 km/h) again after a full brake appli-
cation.
The hazard warning lamps still operate if the
ignition is switched off.
Headlamps fogged up on the inside
Certain climatic and physical conditions may
cause moisture to form in the headlamp. This
moisture does not affect the functionality of the
headlamp.
Exterior lighting
Z
87

Advertisement

Table of Contents
loading

Table of Contents