Memory Functions - Mercedes-Benz G-Class Operator's Manual

Automatic anti-glare mirrors
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if:
the ignition is switched on and
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
i
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior light-
ing is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Setting/storing the parking position
Using reverse gear
: Left-hand exterior mirror
; Right-hand exterior mirror
Adjustment button
=
Memory button
?
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the igni-
tion lock ( page 104).
Y
Press button ; for the exterior mirror on the
X
front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the exte-
X
rior mirror to a position that allows you to see
the rear wheel and the curb.
The parking position is stored.

Memory functions

i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Using the memory button
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. This setting can be stored using
memory button M ?.
Make sure that the SmartKey is in position 2
X
in the ignition lock (
With the exterior mirror on the front-
X
passenger side activated, use adjustment
button = to adjust the exterior mirror. In the
exterior mirror, the rear wheel and the curb
should be visible.
Press memory button M ? and one of the
X
arrows on adjustment button = within three
seconds.
The parking position is stored if the exterior
mirror does not move.
If the mirror moves out of position, repeat the
X
steps.
Calling up a stored parking position set-
ting
Turn the SmartKey to position 2 in the ignition
X
lock ( page 104).
Y
Adjust the exterior mirror on the front-
X
passenger side using button ;.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
as soon as you exceed a speed of 9 mph
R
(15 km/h)
if you press button : for the exterior mirror
R
on the driver's side
Memory functions
Storing settings
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
page 104).
Y
Z
83