Permanent Display - Mercedes-Benz G-Class Operator's Manual

Instrument cluster
Selecting the distance unit
The Display Unit Speed-/Odometer:
tion allows you to choose whether certain dis-
plays appear in kilometers or miles in the mul-
tifunction display.
You can determine whether the multifunction
display shows certain messages in miles or kilo-
meters.
Press the = or ; button on the steering
X
wheel to select the Sett.
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Display Unit Speed-/Odometer
You will see the selected setting:
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to:
digital speedometer in the
R
the odometer and the trip odometer
R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the
R
cruise control
R
DISTRONIC PLUS
R
the service interval display
R
Selecting permanent display
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
Press the = or ; button on the steering
X
wheel to select the Sett.
Press the : or 9 button to select the
X
Instrument Cluster
Press a to confirm.
X
Press the : or 9 button to select the
X

Permanent Display:

You will see the selected setting:
Temperature or Speedometer
Press the a button to save the setting.
X
i
The speed is displayed in mph.
func-
menu.
submenu.
function.
km or miles.
Trip menu
Navi menu
menu.
submenu.
function.
Outside
[mph].
Menus and submenus
Lights
Setting the daytime running lamps
i
This function is not available in Canada.
Press the = or ; button on the steering
X
wheel to select the Sett.
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Daytime Running Lights
If the Daytime Running Lights
been switched on, the cone of light and the
W symbol are shown in red in the multi-
function display.
Press the a button to save the setting.
X
Further information on daytime running lamps
( page 85).
Y
Surround lighting and exterior lighting
delayed switch-off
Press the = or ; button on the steering
X
wheel to select the Sett.
Press the : or 9 button to select the
X
Lights submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Surround Lighting
When the Surround Lighting
been activated, the cone of light is shown in
red in the multifunction display.
Press the a button to save the setting.
X
To activate exterior lighting delayed switch-off
temporarily:
Before leaving the vehicle, turn the SmartKey
X
to position 0 in the ignition lock (
Turn the SmartKey to position 2 in the ignition
X
lock ( page 104).
Y
Exterior lighting delayed switch-off is deacti-
vated.
Exterior lighting delayed switch-off is reactiva-
ted the next time you start the engine.
If you have activated the
function and the light switch is set to Ã, the
following functions are switched on when it is
dark:
surround lighting: the exterior lighting
R
remains lit for 40 seconds after unlocking
with the SmartKey. If you start the engine, the
surround lighting is switched off and auto-
menu.
function.
function has
menu.
function.
function has
page 104).
Y
Surround Lighting
Z
165