Driving Systems - Mercedes-Benz G-Class Operator's Manual

Display messages
4
Engine Oil Level
Cannot Be Measured
8
Fuel Level Low
C
8
Gas Cap Loose

Driving systems

Display messages
TC Shift Conditions
Not Fulfilled
Apply Brake/Parking
Brake
TC Malfunction
Visit WorkshopApply
Parking Brake to
Park
TC Shift Canceled
Please Reactivate
TC shift conditions
not fulfilled
Max. Speed 25 mph
Possible causes/consequences and M Solutions
The measuring system is malfunctioning.
Visit a qualified specialist workshop.
X
The fuel level has dropped into the reserve range.
Refuel at the nearest gas station.
X
There is only a very small amount of fuel in the fuel tank.
Refuel at the nearest gas station without fail.
X
The fuel system pressure is too low. The fuel filler cap is not closed
correctly or the fuel system is leaking.
Check that the fuel filler cap is correctly closed.
X
If the fuel filler cap is not correctly closed:
Close the fuel filler cap.
X
If the fuel filler cap is correctly closed:
Visit a qualified specialist workshop.
X
Possible causes/consequences and M Solutions
The parking brake has not been applied and the brake pedal has not
been depressed. The transfer case has canceled the gear change
process and is in Neutral. There is no connection between the engine
and the drive wheels.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
Depress the brake pedal and apply the parking brake.
X
Shift the automatic transmission to neutral position N.
X
Make sure all conditions for changing gears are met (
X
Repeat the gearshift process.
X
There is a malfunction in the transfer case.
Do not shift the transfer case.
X
When parking, secure the vehicle against rolling away (
X
Have the vehicle checked at a qualified specialist workshop.
X
The transfer case has not performed the gear change process.
Repeat the gearshift process.
X
Make sure all conditions for changing gears are met (
X
You have exceeded the maximum speed for the gearshift process.
Drive more slowly.
X
Repeat the gearshift process.
X
Display messages
page 146).
Y
page 120).
Y
page 146).
Y
179
Z