Important Safety Notes - Mercedes-Benz G-Class Operator's Manual

Features
222
Alternatively, you can call the following tele-
phone assistance services:
USA: Mercedes-Benz Customer Assistance
R
Center at 1-800-FOR-MERCedes
Canada: Customer Service at
R
1-800-387-0100
®
HomeLink hotline 1-800-355-3515 (free of
R
charge)
More information on HomeLink
patible products is also available online at
http://www.homelink.com.
Notes on the declaration of conformity
( page 127).
Y
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
USA only:
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interfer-
ence, and
2. this device must accept any interference
received, including interference that may cause
undesired operation.
Any unauthorized modification to this device
could void the user's authority to operate the
equipment.
Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
1. This device may not cause harmful interfer-
ence, and
2. this device must accept any interference
received, including interference that may cause
undesired operation.
Any unauthorized modification to this device
could void the user's authority to operate the
equipment.

Important safety notes

G
WARNING
When you operate or program the garage door
with the integrated garage door opener, per-
sons in the range of movement of the garage
door can become trapped or struck by the
garage door. There is a risk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door.
G
Combustion engines emit poisonous exhaust
gases such as carbon monoxide. Inhaling
®
and/or com-
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave
the engine running in enclosed spaces with-
out sufficient ventilation.
Programming
Programming
Pay attention to the "Important safety notes"
( page 222).
Y
Garage door remote control A is not included
with the integrated garage door opener.
Delete the memory of the integrated remote
X
control (
for the first time.
Turn the SmartKey to position 2
X
(
Y
Select one of buttons ; to ? to use to con-
X
trol the garage door drive.
To start programming mode: press and
X
hold one of buttons ; to ? on the integrated
garage door opener.
The garage door opener is now in program-
ming mode. After a short time, indicator
lamp : will start flashing. It flashes approx-
imately once per second.
Indicator lamp : flashes immediately the
first time that the transmitter button is pro-
grammed. If this transmitter button has
already been programmed, indicator lamp :
WARNING
page 224) before programming it
Y
page 104) in the ignition lock.