Creating Play List; Playing Play List - Panasonic LQ-MD800 Operating Instructions Manual

Prelimina

Creating PLAY LIST

[RAM]
You can specify start and end
points to create a scene, then
specify the order in which these scenes are played. These scenes are not recorded separately so this doesn't use up much of the disc's capacity.
Preparation
･Insert a disc you have recorded on.
1
While stopped
Press [MENU] .
Use [▲, ▼, , ] to select "CREATE PLAY LIST" and press [ENTER] .
2
3
Use search functions such as fast-forward and slow-motion to find the start point of the scene and press [ENTER] .
4
Use search functions such as fast-forward and slow-motion to find the end point of the scene and press [ENTER] .
Use [▲, ▼] to select "Exit" and press [ENTER] .
5
･To stop partway through
Press [RETURN] .
･To clear the PLAY LIST screen
Press [RETURN] .
The screen returns to the state it was in before you called up the play list.
･To specify another scene
Select "Next" after step 4 and press [ENTER] , then repeat steps 3 and 4.
For your reference
･You can fast-forward, rewind, pause and slow-motion while playing scenes just as you can during normal play.
･One disc can have a maximum of 99 play lists and 999 scenes. These numbers may be reduced under some conditions.
･You cannot specify an end point before a start point or a start point after an end point.
･If you specify an end point but not a start point, the unit determines the beginning of the program as the start point. Similarly, if you specify a start
point but not an end point, the unit determines the end of the program as the end point.
･You may not be able to specify start and end points if the material is still pictures recorded on other equipment.
･The unit pauses play when the end of the last program on the disc is reached during this procedure.
･You can also display the CREATE PLAY LIST screen by selecting "– –" at the bottom of the play list.

Playing PLAY LIST

[RAM]
Preparation
･Insert a disc you created play lists on.
1
While stopped
Press [MENU] .
Use [▲, ▼, , ] to select "PLAY LIST" and press [ENTER] .
2
Use [▲, ▼] to select the play list you want to play and press [ENTER] .
3
･The play list you select is played.
･You can display the play lists after the sixth one by moving [▼] .
･To stop PLAY LIST play
Press [■] .
The play list appears.
For your reference
If you enter a number larger than the total number of play lists, the last play list is selected.
Using the PLAY LIST to edit programs (continued)