Entering Titles - Panasonic LQ-MD800 Operating Instructions Manual

Dvd video recorder
Hide thumbs Also See for LQ-MD800:
Table of Contents

Advertisement

Prelimina
[RAM] [DVD-R]
You can:
・Title discs with the DISC INFORMATION in the FUNCTIONS window.
・Title programs with the DIRECT NAVIGATOR .
・Title play lists with the PLAY LIST screen .
・Title folders of still pictures .
Preparation
・Insert a disc with something recorded on it.
・Select Titling "DISC INFORMATION", Titling "DIRECT NAVIGATOR", or Titling "PLAY LIST" .
1
After the titling screen appears
Use [▲, ▼, , ] to select the character you want to enter and press [ENTER] .
・You can enter the following characters.
(1) This window shows the text you have entered (Title field)
(2) ERASE ( [] )
(3) SET ( [■] ) (when you have finished entering text)
(4) SPACE
To enter other characters
Repeat step 1.
Press [■] . (You can also finish entering the title by using [▲, ▼, , ] to select "SET" and
2
pressing [ENTER] .)
・The title is entered and the screen disappears.
・To stop partway through
Press [RETURN] (does not save any title information).
・Entering titles
・To enter characters
Use [▲, ▼, , ] to select the character you want to enter and press [ENTER] .
・To erase characters
Press [] . (You can also erase characters by using [▲, ▼, , ] to select "ERASE" and pressing [ENTER] .)
・To finish entering the title
Press [■] . (You can also finish entering the title by using [▲, ▼, , ] to select "SET" and pressing
[ENTER] .)
・To correct a character
1) Use [▲, ▼, , ] to select the character you want to correct in the title field.
2) Press [] . (You can also erase characters by using [▲, ▼, , ] to select "ERASE" and pressing [ENTER] .)
3) Use [▲, ▼, , ] to select the correct character and press [ENTER] .
Note
・You cannot enter titles if the program is protected. Release the protection with the direct navigator.
・You cannot enter titles unless the "Disc Protection" in DISC INFORMATION is "Off" .
・You cannot enter titles if the disc is protected with the write protect tab .
・If you enter a long title, only part of it is shown in the program list and play list screen .
・Still picture folder titles
-Titles are saved in the "TITLE.DVD" folder and can only be displayed on this unit.
-Input is not possible if the destination lacks sufficient space or has exceeded the maximum number of allowable files.
-The title may not appear correctly if input was done using other equipment.

Entering titles

Advertisement

Table of Contents
loading

Table of Contents