Checking Program Contents - Panasonic LQ-MD800 Operating Instructions Manual

Prelimina

Checking program contents

[RAM] [DVD-R]
You can check the contents of a selected program.
Preparation
･Insert a disc you have recorded on.
After performing steps 1 to 3 of "Erasing programs", perform the following steps:
Use [▲, ▼] to select "Properties" and press [ENTER] .
4
･The contents of the program are shown.
■To return to the previous screen
Press [RETURN] .
Protecting programs/Releasing program protection
[RAM]
You can prevent accidental erasure of programs by write
protecting them.
Preparation
･Insert a disc you have recorded on.
After performing steps 1 to 3 of "Erasing programs", perform the
following steps:
Use [▲, ▼] to select "Protection" and press [ENTER] .
4
5
Use [] to select "Yes" and press [ENTER] .
･To stop partway through
Select "No" in step 5 and press [ENTER] or [RETURN] .
For your reference
Programs will be erased even if they are protected if you format
the disc with DISC INFORMATION.
Using the SEARCH (DIRECT NAVIGATOR) (continued)