Replacing The Solid-State Drive (Full-Length); Procedure; Post-Requisites - Dell XPS 15 Service Manual

Identifier
Status
Replacing the solid-state drive
(full-length)
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Adhere the thermal pad to the solid-state drive.
2 Slide the solid-state drive at an angle into the solid-state drive slot.
3 Press the other end of the solid-state drive down and replace the screw (M2x3)
that secures the solid-state drive to the system board.
Identifier
Status

Post-requisites

1 Replace the battery (half-length)
2 Replace the base
40
GUID-47BC7D1D-16F9-431C-B5A1-81A1759FBE6A
Released
computer. After working inside your computer, follow
After working inside your
GUID-2E45853F-15D0-4E23-99A9-F91D4DCDF447
Released
GUID-D6D9C7FD-F5F2-4841-BED9-C4F8672A8F1D
Released
or the
cover.
computer. For more safety best
battery (full-length).
Before
www.dell.com/