Solid-State Drive (Full-Length) - Dell D31M Owner's Manual

Steps
1. Align the notch on the M.2230 solid-state drive with the tab on the M.2 card slot on the system board.
2. Slide the M.2230 solid-state drive into the M.2 card slot on the system board.
3. Replace the screw (M2x3.5) that secures the M.2230 solid-state drive to the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Solid-state drive (full-length)

Removing the M.2280 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the M.2280 solid-state drive and provides a visual representation of the removal
procedure.
62 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.