Replacing The Fans; Procedure - Dell XPS 15 Service Manual

Identifier
Status

Replacing the fans

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status

Procedure

1 Align the screw holes on the processor fan (JFAN_1) with the screw holes on the
palm-rest assembly.
2 Connect the processor fan (JFAN_1) cable to the system board.
3 Route the display cable through the routing guides on the processor fan
(JFAN_1).
4 Replace the two screws (M2x4) that secure the processor fan (JFAN_1) to the
system board.
5 Align the screw holes on the video fan (JFAN_2) with the screw holes on the
palm-rest assembly.
6 Connect the video fan (JFAN_2) cable to the system board.
7 Route the touch-screen cable through the routing guides on the video fan
(JFAN_2).
8 Adhere the tape that secures the touch-screen cable to the video fan (JFAN_2).
9 Connect the display cable to the system board.
10 Replace the two screws (M2x4) that secure the video fan (JFAN_2) to the
system board.
GUID-C3E89978-1994-4C7D-98C9-E51C8651B0A6
Released
computer. After working inside your computer, follow
After working inside your
GUID-396D4ADD-FAAE-4C35-AEEF-CB3FC39F26B0
Released
computer. For more safety best
www.dell.com/
Before
51