Identifier
Status
Replacing the base cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Identifier
Status
Procedure
1
Place the base cover on the palm-rest assembly and snap it into place.
2
Replace the 10 screws (M2x3 T5) that secure the base cover to the palm-rest
assembly.
3
Replace the two screws (M2x8) that secure the base cover to the palm-rest
assembly.
4
Turn the system badge over, and snap it into place.
5
Turn the computer over.
18
GUID-27446428-82D7-4881-9220-9EB090B046EA
Released
computer. After working inside your computer, follow
After working inside your
GUID-F113D502-95A9-448F-AB1C-F07A96526541
Released
computer. For more safety best
www.dell.com/
Before