Probe Packet-Interval; Probe Packet-Number - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

probe packet-interval

Use probe packet-interval to configure the interval for sending packets in the probe.
Use undo probe packet-interval to restore the default.
Syntax
probe packet-interval packet-interval
undo probe packet-interval
Default
The interval is 20 milliseconds.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
packet-interval: Specifies the interval for sending packets, in the range of 10 to 60000 milliseconds.
Examples
# Configure the UDP jitter operation to send packets at an interval of 100 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-interval 100

probe packet-number

Use probe packet-number to configure the number of packets to be sent in a UDP jitter, path jitter, or
voice probe.
Use undo probe packet-number to restore the default.
Syntax
probe packet-number packet-number
undo probe packet-number
Default
A UDP jitter or path jitter probe sends 10 packets and a voice probe sends 1000 packets.
Views
Path jitter operation view, UDP jitter operation view, voice operation view
Predefined user roles
network-admin
mdc-admin
50