HP FlexFabric 12500 Series Network Management And Monitoring Command Reference page 34

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

Field
Max negative DS
Negative SD number
Negative DS number
Negative SD sum
Negative DS sum
Negative SD average
Negative DS average
Negative SD square-sum
Negative DS square-sum
One way results
Max SD delay
Max DS delay
Min SD delay
Min DS delay
Number of SD delay
Number of DS delay
Sum of SD delay
Sum of DS delay
Square-Sum of SD delay
Square-Sum of DS delay
SD lost packets
DS lost packets
Lost packets for unknown reason
Voice scores
MOS value
ICPIF value
Hop IP
Path-jitter results
Jitter number
Min/Max/Average jitter
Positive jitter number
Min/Max/Average positive jitter
Description
Maximum absolute value among negative jitters from destination to
source.
Number of negative jitters from source to destination.
Number of negative jitters from destination to source.
Sum of absolute values of negative jitters from source to destination.
Sum of absolute values of negative jitters from destination to source.
Average absolute value of negative jitters from source to destination.
Average absolute value of negative jitters from destination to source.
Square sum of negative jitters from source to destination.
Square sum of negative jitters from destination to source.
Unidirectional delay, available for the UDP jitter or voice operation.
Maximum delay from source to destination.
Maximum delay from destination to source.
Minimum delay from source to destination.
Minimum delay from destination to source.
Number of delays from source to destination.
Number of delays from destination to source.
Sum of delays from source to destination.
Sum of delays from destination to source.
Square sum of delays from source to destination.
Square sum of delays from destination to source.
Number of lost packets from the source to the destination.
Number of lost packets from the destination to the source.
Number of lost packets for unknown reasons.
Voice parameters, available only for the voice operation.
MOS value calculated for the voice operation.
ICPIF value calculated for the voice operation.
IP address of the hop, available only for the path jitter operation.
Path jitter operation results, available only in the path jitter operation.
Number of jitters, available only in the path jitter operation.
Minimum/maximum/average jitter in milliseconds, available only in
the path jitter operation.
Number of positive jitter, available only in the path jitter operation.
Minimum/maximum/average positive jitter in milliseconds,
available only in the path jitter operation.
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents