Display Kernel Reboot - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

4bfffe6c 80780290 7f64db78 4804ea35 <807f002c> 38800000 38a00080 3863000c
For detailed information about the command output, see
Related commands
reset kernel exception

display kernel reboot

Use display kernel reboot to display kernel thread reboot information.
Syntax
In standalone mode:
display kernel reboot show-number [ offset ] [ verbose ] [ slot slot-number ]
In IRF mode:
display kernel reboot show-number [ offset ] [ verbose ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
mdc-admin
Parameters
show-number: Specifies the number of kernel thread reboots to display, in the range of 1 to 20.
offset: Specifies the offset between the starting reboot and the latest reboot, in the range of 0 to 19. The
default value is 0.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
slot slot-number: Specifies an MPU by its slot number. Without this option, the command displays kernel
thread reboot information for the active MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. Without this option,
the command displays kernel thread reboot information for the global active MPU. (In IRF mode.)
Usage guidelines
This command is supported only on the default MDC.
Examples
# Display brief information about the latest kernel thread reboot.
<Sysname> display kernel reboot 1
----------------- Reboot record 1 -----------------
Recorded at
Occurred at
Reason
Thread
Context
Chassis
Slot
: 2013-05-01 11:16:00.823018
: 2013-05-01 11:16:00.823018
: 0x31
: comsh (TID: 16306)
: thread context
: 0
: 0
267
Table 55.