Info-Center Source - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

info-center source

Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor } { deny
| level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
Default
Table 49 lists the default output rules. A default output rule specifies whether or not the common logs,
security logs, diagnostic logs, and hidden logs can be output to a specified destination, and if yes, the
lowest level of the output logs.
Table 49 Default output rules
Destination
Console
Monitor
terminal
Log host
Log buffer
Log file
Security log
file
Diagnostic
log file
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
module-name: Specifies a module by its name. For instance, to output FTP information, specify this
argument as FTP. You can use the info-center source ? command to view the modules supported by the
device.
default: Specifies all modules, which can be displayed by using the info-center source ? command.
Source
Common log
modules
All supported
debugging
modules
All supported
debugging
modules
All supported
informational
modules
All supported
informational
modules
All supported
informational
modules
All supported
modules, cannot Disabled
be filtered
All supported
modules, cannot Disabled
be filtered
Security log
Disabled
Disabled
Disabled
Disabled
Disabled
Debugging, which
cannot be filtered
Disabled
227
Diagnostic log Hidden log
Disabled Disabled
Disabled Disabled
Disabled informational
Disabled informational
Disabled informational
Disabled Disabled
Debugging,
which cannot be Disabled
filtered