Destination Ip - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Predefined user roles
network-admin
mdc-admin
Parameters
text: Specifies a case-sensitive string of 1 to 200 characters.
Examples
# Configure the description for an NQA operation as icmp-probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
# In ICMP template view, configure the description for an NQA operation as icmp-probe.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] description icmp-probe

destination ip

Use destination ip to configure the destination IP address for the operation.
Use undo destination ip to remove the destination IP address.
Syntax
destination ip ip-address
undo destination ip
Default
No destination IP address is configured for the operation.
Views
DHCP operation view, DLSw operation view, DNS operation view, ICMP echo operation view, path jitter
operation view, SNMP operation view, TCP operation view, UDP echo operation view, UDP jitter
operation view, voice operation view, DNS template view, ICMP template view, TCP template view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the destination IP address for the operation.
Examples
# Configure the destination IP address for the ICMP echo operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1
16