Expect Ip; Expect Ipv6 - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Examples
# In HTTP template view, configure the expected status codes 200, 300, and 400 to 500.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] expect status 200 300 400 to 500

expect ip

Use expect ip to specify the expected IP address.
Use undo expect ip to remove all expected IP addresses.
Syntax
expect ip ip-address
undo expect ip
Default
No expected IP address is configured.
Views
DNS template view
Predefined user roles
network-admin
mdc-admin
Parameters
ip-address: Specifies the expected IP address for a DNS echo request.
Usage guidelines
During a DNS operation, the NQA client compares the expected IP address with the IP address resolved
by the DNS server. If they are the same, it considers the DNS server legal.
Examples
# In DNS template view, configure the expected IP address as 1.1.1.1.
<Sysname> system-view
[Sysname] nqa template dns dnstplt
[Sysname-nqatplt-dns-dnstplt] expect ip 1.1.1.1

expect ipv6

Use expect ipv6 to specify the expected IPv6 address.
Use undo expect ipv6 to remove all expected IPv6 addresses.
Syntax
expect ipv6 ipv6-address
undo expect ipv6
Default
No expected IPv6 address is configured.
36