HP FlexFabric 12500 Series Network Management And Monitoring Command Reference page 171

packets
multicast packets : 23
undersize packets : 0
fragments
collisions
Sampling record 2 :
dropevents
packets
multicast packets : 7
undersize packets : 0
fragments
collisions
Sampling record 3 :
dropevents
packets
multicast packets : 6
undersize packets : 0
fragments
collisions
HistoryControlEntry 7 owned by user1 is VALID.
Sampled interface
Sampling interval
Sampling record 1 :
dropevents
packets
multicast packets : 8
undersize packets : 0
fragments
collisions
Table 36 Command output
Field
HistoryControlEntry
entry-number owned by
owner is status.
Sampled Interface
Sampling interval
: 54 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
: 55 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: 0 , octets
: 10 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
: GigabitEthernet 3/0/1 <ifIndex.117>
: 9(sec) with 1 buckets max
: 0 , octets
: 12 , broadcast packets
, CRC alignment errors : 0
, oversize packets
: 0 , jabbers
: 0 , utilization
Description
Status and owner of the history control entry.
•
entry-number—History control entry index (MIB object historyControlIndex).
•
owner—Entry owner (MIB object historyControlOwner).
•
status—Entry status (MIB object historyControlStatus):
VALID—The entry is valid.
UNDERCREATION—The entry is invalid.
The status field is not configurable at the CLI. All history control entries created
from the CLI are valid by default.
The display rmon history command can display invalid entries, but the display
current-configuration and display this commands do not display their settings.
Sampled interface (MIB object historyControlDataSource).
Sampling interval in seconds (MIB object historyControlInterval).
163
: 9
: 0
: 0
: 0
: 5367
: 1
: 0
: 0
: 0
: 936
: 0
: 0
: 0
: 0
: 1150
: 0
: 0
: 0
: 0