Intermec PB22 User Manual page 36

Print Speed and Resolution
Print speed: 4 ips (100 mm/s)
Resolution: 203 dpi (8 dots/mm)
Print Technology
Printhead:
Maximum print width:
Media Specifications
Minimum gap and black mark length:
Minimum gap, black mark, and notch length:
Minimum notch length:
Minimum notch width:
Black mark width:
Core inside diameter:
Roll outside diameter:
Tracking1
Minimum caliper for label with liner and receipts:
Maximum caliper for label with liner and receipts:
Maximum caliper for tags:
Minimum media length:
Maximum media length:
Receipt roll stock media is supplied as a continuous roll. Label, tag,
and fanfold media use repeat indicators for non-continuous media.
Gap, notch, and black marks are used as repeat indicators:
•
•
•
PB22/PB32 Portable Label and Receipt Printer User's Guide
Direct thermal
PB22 55.88 mm (2.2 in)
PB32 83.82 mm (3.3 in)
Gap: Label and fanfold media
Notch: Tag media
Black mark: Label, tag, and fanfold media
Chapter A — Specifications
3.17 mm (0.125 in)
12.7 mm (0.50 in)
6.35 mm (0.25 in)
12.7 mm (0.50 in)
Full width of media
19.05 mm (0.75 in)
10.16 mm (0.40 in for receipt paper)
PB22 57.15 mm (2.25 in)
PB32 67.31 mm (2.65 in)
Center
0.05 mm (0.002 in)
0.165 mm (0.0065 in)
0.15 mm (0.006 in)
12.7 mm (0.5 in)
Continuous
53