Ethernet Ports - Cisco 1120 Hardware Installation

Router Hardware Description
Hardware Features
Specifications
Specification
Connector type
Copper Interface
Fiber
Pinouts

Ethernet Ports

See Figure 5 on page 22
Ethernet Connections
The router supports the following Ethernet connection types:

1000BASE-T—1000 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair (UTP) cable.
Supports the Ethernet maximum length of 328 feet (100 meters).

100BASE-T—100 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair (UTP) cable.
Supports the Ethernet maximum length of 328 feet (100 meters).

10BASE-T—10 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair (UTP) cable.
Supports the Ethernet maximum length of 328 feet (100 meters).
Fast Ethernet (FE) Ports
The router features six Fast Ethernet (FE) ports that can be connected to local network devices, such as IEDs, sensors,
and reclosers. The ports are labeled as follows:

ETH 2/3

ETH 2/4

ETH 2/5

ETH 2/6

ETH 2/7

ETH 2/8
Description
RJ-45
Full-duplex 10BASE-T, 100BASE-TX, 1000BASE-T
SFP modules:

1000 Mbps 8B/10B coding

100 Mbps 4B/5B coding.
See Connector and Cable Specifications, page
for Ethernet port locations
95.
25