Rear Panel Led Locations - Cisco 1120 Hardware Installation

Router LED Locations and States
View the Cisco 1120 Connected Grid Router LEDs to determine the overall state of the system and to verify the status of
specific connections, ports, and system components.
In addition to viewing the LEDs on the router hardware, you can use the router command line interface as described in
Related Commands, page 90
These topics are discussed:

Rear Panel LED Locations, page 85

Power Supply LED, page 86

SYS LED-System Status, page 86

ACT LED-System Activity, page 87

WIFI LED-WiFi Link Status, page 87

GPS LED-GPS Link Status, page 87

CONSOLE LED-Console Port Status, page 88

ALM LEDS-Alarm Port Status, page 88

Ethernet LEDs-Network Links Status, page 88

SD Card LED Location, page 89

SD LED-SD Card Status, page 90

Related Commands, page 90

Rear Panel LED Locations

Most of the router LEDs are located on the router cable panel (rear panel) as shown in
The SD card status LED is located on the router module panel (front panel). For more information, see
Location, page 89.
to check the system status LED state from remote locations.
Cisco Systems, Inc.
85
www.cisco.com
Figure 1 on page 86.
SD Card LED