Cisco 1120 Hardware Installation page 54

Figure 7 Router Power and Reset Buttons
1
Item Button
1 CONFIG Reset
2 PWR RESET
PE N L3 L2 L1
Description
Press the CONFIG Reset button for at least 5 seconds to return the router software
configuration to the factory default, and power cycle the router. Power cycling the router
turns the router off, then immediately back on. The router will temporarily stop operating on
the network during the power cycle, then resume operating when the power cycle process
is complete.
Press the PWR RESET button for at least 5 seconds to power cycle the router. Power cycling
the router turns the router off, then immediately back on. The router will temporarily stop
operating on the network during the power cycle, then resume operating when power cycle
process is complete.
54
2
-
+