HP XP7 User Manual page 318

Item
Full Allocation
Tiering Policy
New Page Assignment Tier
Tier Relocation
Relocation Priority
Attribute
Virtual Storage Machine
318 Thin Provisioning Z and Smart Tiers Z GUI reference
Description
Used: Displays the sum of the mapped capacity and the reserved capacity.
The displayed value of Used might be larger than the displayed value of Total
due to following reasons:
◦
Useddisplays the sum of the mapped capacity and the reserved capacity
that is rounded up on each page.
◦
If the emulation type is 3390-A, the mapped capacity of V-VOL includes
the capacity of control cylinders (7 Cyl is required per 1,1 13 Cyl).
◦
The mapped capacity of THP V-VOL includes the capacity of the control
information (Requires a maximum of 168 MB per 3,145,548 MB).
Used(%): For the entire capacity of V-VOL, this item displays percentages of
the sum of the mapped capacity and the reserved capacity.
Displays the status of the setting for the full allocation in a pool that are associated
with the V-VOL.
Enable: Pages are reserved.
Disable: Pages are not reserved.
Displays the tiering policy name and ID.
All(0): Policy in which all tiers of the pool are used.
Level1(1) - Level5(5):Policy selected from levels 1 to 5 is set to the V-VOL.
Level6(6) - Level31(31): Policy defined by the user and set to the V-VOL.
Hyphen (-): V-VOL is not the V-VOL of Smart Tiers or Smart Tiers Z V-VOL.
Displays the new page assigned tier.
High: High is set to V-VOL.
Middle: Middle is set to V-VOL.
Low: Low is set to V-VOL.
Hyphen (-): V-VOL is not the Smart Tiers or Smart Tiers Z V-VOL.
Displays whether tier relocation is set to enable or disable. If the Smart Tiers or
Smart Tiers Z V-VOL is not used, a hyphen (-) is displayed.
Displays the relocation priority.
Prioritized: The priority is set to V-VOL.
Blank: The priority is not set to V-VOL.
Hyphen (-): V-VOL is not the Smart Tiers or Smart Tiers Z V-VOL or the tier
relocation function is disabled.
Displays the attribute of the LDEV.
TSE: TSE-VOL.
Hyphen (-): Volume in which the attribute is not defined.
Information about the virtual storage machine.
Model / Serial Number: Model name and serial number of the virtual storage
machine that has LDEV.
LDEV ID: Virtual LDEV ID. If a Virtual LDEV ID is not assigned to LDEV, this
column is blank.
Device Name: Virtual device name, which is a combination of the virtual
emulation type, virtual LUSE volume number, and the virtual CVS attribute.
Values of the virtual emulation type, virtual LUSE volume number, and virtual
CVS attribute appear only for items that have been set. This column is blank
when the virtual emulation type, virtual LUSE volume number, and virtual CVS
attribute are not set. If the virtual CVS attribute is set, CVS is attached as the
suffix to the device name.