HP XP7 User Manual page 287

Item
Subscription Limit
Pool Name
Description
Select the Relocation Speed check box. Then set the tier relocation speed.
Relocation Speed: Specify the page relocation speed when tier relocation is
performed. You can set the speed to: 1(Slowest), 2(Slower), 3(Standard),
4(Faster), or 5(Fastest).
Select the Buffer Space for New page assignment check box, and then set the
buffer space for new page assignment.
Buffer Space for New page assignment: Enter an integer value from 0 to 50 as
the percentage (%) to set for tier 1, tier 2, and tier 3. If there is no tier, you
cannot set this item.
Select the Buffer Space for Tier relocation check box, and then set the buffer
space for tier relocation.
Buffer Space for Tier relocation: Enter an integer value from 2 to 40 as the
percentage (%) to set for tier 1, tier 2, and tier 3.
If the check box is not selected, you cannot set this item. You must set all items
if you change the pool setting from Thin Provisioning (or Thin Provisioning Z) to
Smart Tiers (or Smart Tiers Z).
If the check box is selected, you cannot collapse the Options for Smart Pool field.
Select the Subscription Limit check box, and then enter the subscription limit (%).
In Fast Snap, you cannot change the setting of this function.
If this field is blank, the subscription is set to be unlimited.
For an open system, use blank or a value in the following range:
(Total V-VOL capacity including the control information / pool capacity) *
100(%) +1 to 65534(%)
For a mainframe system, use blank or a value in the following range:
(Total V-VOL capacity / pool capacity) * 100(%) +1 to 65534(%)
For the open system, when the current subscription setting is unlimited and
the value calculated by the following formula exceeds 65534, you cannot
configure the subscription limit.
((Total V-VOL capacity including the control information / pool capacity) *
100)
For the mainframe system, when the current subscription setting is unlimited
and the value calculated by the following formula exceeds 65534, you cannot
configure the subscription limit.
((Total V-VOL capacity / pool capacity) * 100)
If the check box is not selected, the subscription limit is disabled.
Select the Pool Name check box, and then enter the pool name.
Prefix: Enter the alphanumeric characters, which are fixed characters of the
head of the pool name. The characters are case-sensitive.
Initial Number: Enter the initial number following the prefix name, which can
be entered up to 9 digits.*
You can enter up to the 32 characters including the initial number. The initial
number must be 9 or less digits.
*When a pool is selected, the pool name appears in the Prefix text box by
default. When multiple pools are selected, the initial number from the set number
to the maximum number of the digit number is automatically set.
Example:
When 1 is set in the Initial Number field, number 1 to 9 is automatically given
to the pool name.
When 08 is set in the Initial Number field, number 08 to 99 is automatically
given to the pool name.
When 098 is set in the Initial Number field, number 098 to 999 is
automatically given to the pool name.
Edit Pools wizard 287