HP XP7 User Manual page 194

Item
Add
Remove
Selected Ports table
Item
Port ID
Attribute
194 Resource Partition GUI reference
Description
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
Target: Receives I/O commands from a host.
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
External: Issues I/O commands to a target port of an external storage system with
External Storage.
HTP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the external storage system.
FNP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the local storage system.
Adds one or more ports selected in the Available Ports table to the Selected Ports table.
Removes one or more selected ports from the Selected Ports table and relocates the
ports to the Available Ports table.
Description
Port identifier.
Attribute of the port indicating I/O flow.
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
Target: Receives I/O commands from a host.
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
External: Issues I/O commands to a target port of an external storage system with
External Storage.