HP XP7 User Manual page 268

Item
Pool Name (ID)
Pool VOL with System Area (Name)
Pool Type
RAID Level
Drive Type/RPM
Cache Mode
Protect V-VOLs when I/O fails to
Blocked Pool VOL
Protect V-VOLs when I/O fails to Full
Pool
Number of Pool VOLs
Number of V-VOLs
Number of Primary VOLs
268 Thin Provisioning Z and Smart Tiers Z GUI reference
Description
Exceeded Threshold: Percentages of the sum of the mapped capacity of the
pool and the reserved capacity of the pool exceed the pool threshold.
Shrinking: Pool-VOL is being reduced.
Blocked: The pool is full, or an error occurred in the pool, indicating that
the pool is blocked. If the pool is in both Warning and Blocked status, only
Blocked is displayed.
Displays the pool name and pool ID.
Displays the LDEV ID and LDEV name of the pool-VOL which includes the pool
management area.
Displays the pool type.
For a Thin Provisioning pool, THP is displayed.
For a Smart Tiers pool, Smart is displayed.
For a Thin Provisioning Z pool, Mainframe THP is displayed.
For a Smart Tiers Z pool, Mainframe Smart is displayed.
For a Fast Snap pool, FS is displayed.
Displays RAID level. If multiple RAID levels exist in a pool, this field indicates
that RAID levels are mixed. If all pool-VOLs are external volumes, a hyphen (-)
is displayed.
Displays the data drive type and RPM of the pool. If multiple drive types or
RPMs exist in a pool, this field indicates that drive types or RPMs are mixed.
When the volume is the external volume, Drive Type displays External Storage
and the value of the external LDEV tier rank.
For a configuration of external volumes, cache mode is displayed as enabled
or disabled. For the configuration of external volumes whose cache modes are
enabled and disabled, Mixed is displayed. For a other configurations, a hyphen
(-) is displayed.
Displays whether the protect function for THP V-VOL is being enabled or
disabled. If the setting is enabled, when the pool-VOL is blocked, THP V-VOL
is protected from reading and writing requests. And at the same instant, the
access attribute of the THP V-VOL is changed to the Protect attribute.
A hyphen appears if the pool corresponds with one of following:
Data Retention is not installed.
Pool type is other than THP or Smart.
Displays whether the protect function for THP V-VOL is being enabled or
disabled. If the setting is enabled, when the pool usage reaches the full size,
THP V-VOL is protected from reading and writing requests. And at the same
instant, the access attribute of the THP V-VOL is changed to the Protect attribute.
A hyphen appears if the pool corresponds with one of following:
Data Retention is not installed.
Pool type is other than THP or Smart.
Displays the number of pool-VOLs set for the pool, and the maximum number
of pool-VOLs that can be set for the pool.
Displays the number of V-VOLs associated with the pool, and the maximum
number of V-VOLs that can be associated with the pool.
For a Fast Snap, a hyphen (-) is displayed.
Displays the number of primary volumes of the Fast Snap pairs. When the
applicable volume does not exist, a hyphen (-) is displayed.