Operating Your Remote Control - Philips Magnavox REM400 User Manual

OPERATING YOUR REMOTE CONTROL

The DSS Universal Remote Control is
designed to be an enhanced replacement for
your original remote control.Although most
keys operate the same (see Key Charts on
page 3), some do differ or provide unique
features as described below.
DSS Directional Pad
The DSS remote control allows you to con-
trol the on-screen menu just like you would
with your original remote control. Pressing
the MENU key allows you to access the on-
screen menu of the component you have
selected (e.g. TV, VCR, CBL, AUD, DSS, or CD).
While in the menu, you can use the direc-
tional pad* to navigate and change the set-
tings of the menu. To exit out of the Menu
mode, either press the MENU key again or
the EXIT key (depending on how the original
remote control functioned).
*NOTE: If your component's On-Screen menu
requires the use of the Volume and Channel
keys to navigate and change the On-Screen
menu settings, you will need to use the VOL+ ,
VOL– , CH+ , and CH – keys.
GUIDE Key
The GUIDE key works just like the Guide key
of your original remote control and allows
you to access the On-Screen guide* of the
component you have selected (e.g.CBL, DSS,
and some newer TVs).
While in the Guide mode, the directional
pad will allow you to navigate Up, Down,
Left and Right just like you would with your
original remote control.
To exit out of the Guide mode, either press
the GUIDE key again or EXIT (depending on
how the original remote control functioned)
to return to normal operation.
NOTE: *On-Screen guide is an interactive
channel listings menu that is available on
most DSS Satellite systems and is also used
with advanced converters being offered by
some cable systems. This feature is not applic-
able for all DSS or cable boxes.
SELECT Key
The SELECT key lets you choose features displayed
on the On-Screen menu and programs while in
the Guide mode.
If your original remote includes a Select key,
then the DSS's SELECT key will operate in the
same manner for the selected component.
8
L1~L3 Keys
Use the learning (L1, L2, L3) keys to add
functions that are unique to your home
entertainment components (e.g., Tracking
Up or Down for a VCR).
NOTE: Please have your original remote con-
trols handy before programming learning. Be
sure to press each key within 10 seconds of the
previous entry. If not, the remote control will
exit the programming mode.
To Program The L Keys:
1. On the DSS remote control, press
and hold SET until the red light
blinks twice,then release SET.
2. Enter 9-7-5. The red light will
blink twice.
3.
4. Press the L key once (e.g.,L1~L3)
in which the new feature is to be
learned. The red light will blink
rapidly.
5. Place your original remote con-
trol head to head (about 2" apart)
from the DSS remote control.
6. On your original remote control,
press and hold the key (i.e., fea-
ture) to be learned until the red
light on the DSS remote control
blinks twice. If the red light does
not blink twice, stop and repeat
steps 1 through 5.
7. To learn functions on the other
L keys, repeat steps 3 through 6.
8. To lock in new feature(s) on the
DSS remote control,press and hold
SET until the red light blinks twice.
9. To test a new feature, press the
component key that was learned
once.Then press the L key where
the component's feature was
learned.
Press the component
key once in which
you want to learn a
feature (e.g.,TV).
2"