2
2.1
•
When replacing the batteries, all user settings will be
retained in the remote control memory for an unlimited
period of time.
2.2
It is advised to test whether your device(s) already
respond(s) to the SRP4004 before setting it up (see chapter
2.3). The example below instructs you how to do this for
your TV. You can repeat the same steps for other devices
(STB, DVD player/recorder and VCR) which you want to
operate using the SRP4004.
Example: testing the universal remote control on your TV:
1
2
• I f the key does not light up,
3
• If the device does not respond at all or not to all of the key
4
SRP4004_86_Manual.indd 4
Getting started
Inserting the batteries
Insert 2 AAA type batteries,
noting the + and -
configuration in the battery
compartment.
Note
Testing the universal remote control
Turn ON your TV manually or use the original remote
control for this. Tune to channel 1.
Press the
device
selection key to select TV.
• The key lights up.
check whether the batteries
are properly inserted
(see chapter 2.1).
Check whether the keys
that you need for operating
your TV are working. For an
overview of the keys and
their functions see
chapter 3.1.
• I f the TV responds as it should to all of the key
commands, the SRP4004 is ready for use.
commands, follow the instructions in chapter 2.3.
EN
28-05-09 18:17