Final Drive Oil - Honda VTX1300T 2009 Owner's Manual

Final Drive Oil

Oil Recommendation
type
viscosity
(weight)
Checking & Adding Oil
Refer to Saf ety Precautions
LEFT REAR
(2)
(1) oil filler cap
(2) oil filler hole
104
Servicing Your Honda
hypoid gear oil
SAE 80
on page 62 .
(1)
1. Place the motorcycle on its side stand
on a firm, level surface.
2. Remove the oil filler cap ( ).
3. Check the oil level. It should be flush
with the lower edge of the oil filler hole
( ). 2
4. If the level is low, check for leaks. Add
the recommended oil through the oil
filler hole until it reaches the lower
edge of the opening.
5. Install the oil filler cap and tighten to
the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
1