Honda VTX1300T 2009 Owner's Manual page 102

Engine Oil & Filter
This procedure requires mechanical skill
and professional tools such as a torque
wrench and oil filter wrench, as well as a
means for disposing of the drained fluid
(page 157 ). If you do not have the skills
or the tools, see your Honda dealer.
Drain the Engine Oil:
1. Park the motorcycle on its side stand on
a firm, level surface.
2. If the engine is cold, start it and let it
−
idle for 3 5 minutes. Turn the engine
off. Wait 2 3 minutes for the oil to −
settle.
94
Servicing Your Honda
3. Place a drain pan under the crankcase.
4. To drain the oil, remove the oil filler
cap/dipstick, drain bolts ( ), ( ) and
sealing washers ( ).
RIGHT FRONT, UNDER ENGINE
(2) (3)
(1) drain bolt (front)
(2) drain bolt (rear)
1 2
3
(1)
(3) sealing washers