Changing Oil
Refer to
Saf ety Precautions
LEFT REAR
(4)
(1) oil drain bolt
(2) oil filler cap
(3) sealing washer
(4) oil filler inspection hole
Change the oil with the final drive at
normal operating temperature to assure
complete and rapid draining.
on page
62
.
(2)
(3)
(1)
Final Drive Oil
1.
Place the motorcycle on its side stand
on a firm, level surface.
2.
Place a drain pan under the oil drain
bolt ( ).
1
3.
Remove the oil filler cap ( ) and the oil
drain bolt.
4.
After the oil has completely drained,
check that the sealing washer ( ) is in
good condition. Reinstall the oil drain
bolt with its sealing washer (or a new
washer, if necessary) and tighten it to
the specified torque:
15 lbf·ft (20 N·m , 2.0 kgf·m)
Servicing Your Honda
2
3
(cont'd)
105