3 Connecting with a Vision Sensor
3
Select the data that you want to transfer.
The [Data transfer] window is displayed.
Select the check box of the data that you want to transfer.
4
Initiate the data transfer.
To transfer the setting data in FH vision sensor to the project, select [Transfer to computer].
Choose [Yes] when the below message appears to begin the transfer.
Precautions for Correct Use
To transfer settings data with large file sizes, you will need to use a compatible external mem-
ory device that can be inserted into the FH vision sensor.
If the below message appears to indicate that the file size is too large for a normal transfer,
insert a compatible memory device with enough free space to proceed.
3 - 10
Vision System FH Series Operation Manual for Sysmac Studio (Z343)