Omron FH Series Operation Manual page 41

Sensor connection screen
This allows you to access the sensor information, the connection with the sensor, the main screen of
each line, etc.
Group
Sensor name
Comment
Sensor Type
information
Version
Available applica-
tion memory
IP address
Connect
Disconnect
Online
Search for sensors
Sensor Restart
Initialize
Additional Information
• For details on the settings in the sensor connection screen, refer to 3-2 Establishing an
Online Connection with a Vision Sensor on page 3-4.
• If there is already a different FH slave device in the project with an established online con-
nection, you will not be able to establish an online connection for a new FH slave device.
First, switch the other FH slave device from online to offline.
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
Item
Allows you to change the sensor name.
Allows you to enter a comment for the sensor.
Displays the sensor type information.
Displays the sensor version information.
Displays the amount of available application memory.
Sets the IP address of the sensor for online connections.
Establishes an online connection to the sensor with the specified IP address.
Disconnects the sensor currently connected with an online connection.
Searches for sensors within the same network.
Restarts the sensor.
Initializes the sensor.
2 Basic Operations
Description
2
2 - 13