Synchronization With The Nj/Nx-Series Controllers - Omron FH Series Operation Manual

9-2 Synchronization with the
NJ/NX-series Controllers
Consider the following limitations when synchronizing the project with the NJ/NX-series controller to
which the FH vision sensor is connected.
Downloading ([Transfer to Controller])
• The setting data in FH vision sensor are not downloaded.
• To download the setting data in FH vision sensor, establish an online connection for the vision
sensor. Refer to 2-8 Precautions on Synchronization through an NJ/NX-series Controller on page
2-39.
• The global variables allocated to the FH vision sensor I/O ports in the I/O Map are downloaded.
Uploading ([Transfer to computer])
• The setting data in FH vision sensor are not uploaded.
• The FH vision sensor setting data are initialized after uploading. Be sure to establish an online
connection for FH vision sensor before the synchronization. Refer to 2-8 Precautions on Synchro-
nization through an NJ/NX-series Controller on page 2-39.
• The global variables allocated to the FH vision sensor I/O ports in the I/O Map are downloaded.
For details on the synchronization to the NJ/NX-series controller, refer to Sysmac Studio Version 1
Operation Manual (Cat. No. W504).
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
9 Limitations
9
9 - 5