Omron FH Series Operation Manual page 148

9 Limitations
Elapsed Time
Parallelize
Parallelize Task
Conditional Branch
DI Branch
End
Selective Branch
Control Flow Normal
Control Flow PLC Link
Control Flow Parallel
Control Flow Fieldbus
Parallel Judgment Output
Data Output
Parallel Data Output
Fieldbus Data Output
Result Display
Display Image File
Display Last NG Image
Conveyor Panorama Display
*1. Sysmac Studio ver.1.09 or later is required to register and edit the processing item(s).
*2. FH Sensor Controller ver.5.20 or later is required to register and edit the processing item(s).
*3. FH Sensor Controller ver.5.50 or later is required to register and edit the processing item(s).
Precautions for Correct Use
The below application will run while the FH vision sensor is being edited offline.
FZ-CoreRA 0.exe
Do not attempt to exit this application manually. Exiting this application prematurely may cause
problems to arise with the FH editing. Should the application be closed accidentally, end Sys-
mac Studio, restart the computer, and try again.
9 - 4
Processing Unit
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
: Supported, x: Not supported
Registration Editing
*3 *3