Omron FH Series Operation Manual page 100

5 Designing Exchange with External Devices
The FH vision sensor has the following interfaces.
• Parallel I/O
• RS-232C/422
• Ethernet
• EtherCAT
Each interface supports various communication protocols.
You can configure their communication settings in the system settings of the FH tools.
Configure the communication settings for each line when in the multiple multi-line random-trigger
modes. However, some data is settings data that is common to the lines.
Group
Parallel I/O
RS-232C/422
Ethernet
EtherNet/IP
EtherCAT
If the communication settings are changed, the FH vision sensor needs to be restarted.
If a parameter that requires a restart is edited, "
Explorer. If "
For details on restarting, refer to 2-4-4 Multiview Explorer on page 2-10.
5 - 2
Item
Address settings
Input/output settings
" is displayed, save the settings and then restart the FH vision sensor.
Common to lines
Common to lines
Common to lines
Individual to each line
Individual to each line
* Some parameters are common to lines
Individual to each line
" is displayed for the sensor type in the Multiview
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
Attribute