Viewing Existing Patient Studies; How To Change The Display Format - Siemens ACUSON Cypress Operator's Manual

Viewing Existing Patient Studies

The View function displays images from existing studies stored on either the
internal hard disk or a removable optical disk. Only one patient study can be
viewed at a time.
To select a study, follow these steps:
Press the
PATIENT
1.
Scroll through the directory by positioning the cursor on the up or down
2.
arrow and pressing <
Use the Trackball to highlight the desired study date and time and press
3.
< >.
ENTER
Click the [
ACTIVATE
4.
Press the function key to display the study.
VIEW
5.
To exit View and return to the patient directory, press
6.
continue scanning, press
NOTE
An alternate method of activating a study is to double-click the study in the
Patient List. If a patient folder contains more than one study, double-click the
specific study date and time.

How to Change the Display Format

Studies may be reviewed in two ways:
Full screen—For live imaging or reviewing saved loops.
Quad screen—For reviewing saved loops only.
NOTE Only the first 25 frames of the loop are displayed when viewing
images in quad screen mode.
To change the display format, follow these steps:
Press the key once to display full-screen mode.
VIEW
1.
Press again to display quad-screen mode.
VIEW
2.
To exit, press .
2D
3.
ACUSON Cypress™ Operator's Manual
function key to display the Patient/Study list.
> or by turning the Main knob.
ENTER
] button.
.
2D
Using Existing Studies
To exit and
PATIENT.
4-19