How To Edit The Estimated Value While Performing A Calculation; Selecting A Report Format; Selecting A Report Background Color; Using The Averaging Function - Siemens ACUSON Cypress Operator's Manual

How to Edit the Estimated Value While Performing a
Calculation
To make a one-time change to an estimated value (the system will revert back
to the setup default after this calculation), follow these steps while performing a
calculation:
Click the field. For example, click [
1.
mated RA Pressure of 10 that was specified in the Setup menu.
Click [ ] a second time to open the edit box.
PRESSURE
2.
Type in a new estimate and click the [
3.

Selecting a Report Format

Press the key and click the Calculations heading.
SETUP
1.
Click Reports. Select either the Complete format or the Configured format.
2.
A report in the Complete format displays the entire report, including sec-
tions with open data fields.
The Configured format displays only the sections where data has been
entered.

Selecting a Report Background Color

Press the key and click the Calculations heading.
SETUP
1.
Click Reports.
2.
Select a color.
3.

Using the Averaging Function

When averaging is turned
will automatically display the averaged result when two or more of the same
measurements are completed. To turn averaging
Press the key and double-click the Calculations heading.
SETUP
1.
Highlight Averaging. A checkmark indicates if the averaging function is
2.
active. If it is not, click the checkbox to turn averaging
, click the checkbox to remove the checkmark.)
OFF
NOTE Averaging can be activated or deactivated on a per-study basis using
the patient information screen independent of the system wide selec-
tion in the Setup Menu.
ACUSON Cypress™ Operator's Manual
PRESSURE
] button.
SET
, measurements that are part of the patient report
ON
Cardiac Calculations Setup
] to display the default esti-
, follow these steps:
ON
. (To turn averaging
ON
6-5