Siemens ACUSON Cypress Operator's Manual page 50

3-6
Setup Menu Fields
TABLE 4.
Field
Trackball Speed
Double-Click
Speed
ACUSON Cypress™ Operator's Manual
Description
Adjusts the speed of the Trackball. There are two
options that can be set independently:
General — For Trackball operation when not per-
forming a measurement.
Measurement — For Trackball operation when
performing a measurement.
To set the Trackball speed, use the Trackball and
< > keys. Place the cursor on the speed marker
ENTER
and then press and hold the <
ing the Trackball to set the speed. Or, use the Track-
ball to position the cursor at a point within the range
scale and then press the <
marker will move towards the cursor. To slow down
the Trackball, slide the bar to the left; for a faster
Trackball, slide the bar to the right.
Sets the speed of the double-click used throughout
the system (for example, when selecting a patient). To
slow down the double-click (i.e., allow more time
between clicks), slide the bar to the left. For faster
double-click, slide the bar to the right.
Basic Setup
> key while mov-
ENTER
> key, the speed
ENTER