Pstn Detection; Figure 107: Ucm6510 Fxo Tone Settings; Figure 108: Ucm6510 Pstn Detection - Grandstream Networks UCM6510 User Manual

PSTN Detection

PSTN Detection
The UCM6510 provides PSTN detection function to help users detect the busy tone, Polarity Reversal and
Current Disconnect by making a call from the PSTN line to another destination. The detecting call will be
answered and up for about 1 minute. Once done, the detecting result will show and can be used for the
UCM6510 settings.
1. Go to UCM6510 Web GUIExtension/TrunkAnalog Trunks page.
2. Click to edit the analog trunk created for the FXO port.
3. In the dialog window to edit the analog trunk, go to "Tone Settings" section and click on "Detect" for
"PSTN Detection".
4. Click on "Detect" to start PSTN detection.
Click on "Detect" to detect the busy tone, Polarity Reversal and Current
Disconnect by PSTN. Before the detecting, please make sure there are
more than one channel configured and working properly. If the detection
has busy tone, the "Tone Country" option will be set as "Custom".

Figure 107: UCM6510 FXO Tone Settings

Figure 108: UCM6510 PSTN Detection

UCM6510 IP PBX User Manual
P a g e | 172