General Specifications - Citizen CL-E720DT Technical Manual

1-1. General Specifications

Printing
Printing method
Resolution
Max. print width
Max. print length
Print density
Printing speed setting
Print mode
Batch mode
Tear off mode
1
Cut mode *
1
Peel mode*
Media
Types of media
Recommended media
Max. media width
Min. media width
Min. label width
2
Min. label pitch*
Max. media thickness
Max. media length
Min. media length
Min. media thickness
*1: Options can be separately purchased.
*2: When a media pitch of less than 25.4 mm (1 inch) is used, set the "Small Media
Adjustment" setting in the "Page Setup" menu to "ON".
Direct thermal
Main scanning line density: 203 dots/inch (8 dots/mm)
Sub-scanning line density: 203 dots/inch (8 dots/mm)
Head: 864 dots (effective dots: 832 dots)
104 mm
2539.7 mm
Print density is adjustable with software.
8, 7, 6, 5, 4, 3 or 2 inches per second
* At a printing speed of 8 or 7 inches per second, use density 10
and recommended thermal paper at normal temperature.
* 6, 5, 4, 3 or 2 inches per second when an optional peeler is used.
Normal printing (single or multiple sheets)
Feeds back media to the tear-off position after printing is
completed.
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are available.
• Back feed • Cut through
(Cut through refers to stopping present printing to cut the previous
label when it reaches the cut position. After cutting, printing restarts
but a gap may be created at the seam of the printing at this time.)
Peels labels from the liner after printing them.
Roll, fanfold
(continuous media, die-cuts, continuous tags, paper or tickets)
label media (150LA-1 Ricoh), tag media (130LHB Ricoh)
118.0 mm
19.5 mm
19.5 mm
6.35 mm
0.254 mm
2539.7 mm
6.40 mm
0.0635 mm
1-3
Chapter 1 Specifications
1-1. General Specifications
4.1"
99.99"
4.65"
0.77"
0.77"
0.25"
0.01"
99.99"
0.25"
0.0025"
CL-E720DT