Sa Power Sw Cable" And "Frame Bottom - Citizen CL-E720DT Technical Manual

3-6-8. "SA Power SW Cable" and "Frame Bottom"

1. Remove the "Cover PF Motor". Refer to
2. Remove the "Unit Opepane". Refer to
3. Remove the "Case" and "Cover Steel L". Refer to
4. Remove all connectors from the "SA Main PCB". Refer to
5. Remove the "Unit Mechanism". Refer to
6. Remove the "Unit Power Supply" Block and "Paper Holder" Block. Refer to
Supply" Block and "Paper Holder"
7. Remove the 1 screw (BH M3.0x5K) () and 2 screws (BH M3.0x4 (NI)) (), and detach the
"Cover Steel R" ().
8. Remove the 5 screw (BH M3.0x5K) (), detach the "Cover Steel Rear" (), and peel off the
labels ("Label Caution (CHINA)" and "Label Rating") from it.
9. Remove the 1 screw (PH (SW+PW) M4x6) () and 2 screws (NO2 FH M3.0x6 (NI)) (), and
detach the "SA Power SW Cable" () and "Cover Plate Inlet".
10. Remove the 2 screw (BH M3.0x4 (NI)) and detach the "Plate Inlet".
11. Remove the 2 screw (PH (SW+PW) M4x6) and detach the "Plate Hinge R".
12. Remove the 2 screw (PH (SW+PW) M4x6) and detach the "Plate Hinge L".
13. Remove the 4 screw (BH M3.0x8) and detach the "Leg" (4 pcs.).
PH (SW+PW) M4x6
Plate Hinge L
Frame Bottom
Leg
BH M3.0x8
Note on reassembling:
• Once the label is peeled off, it cannot be reused.
"3-6-3(1) Unit
Block".
8 SA Power SW Cable
PH (SW+PW) M4x6
6
Cover Plate Inlet
Plate Inlet
BH M3.0x4
(NI)
PH (SW+PW)
M4x6
2
BH M3.0x4 (NI)
Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
"3-6-2 Cover PF Motor".
Opepane".
"3-6-4 Case".
"3-6-5(1) "SA Main PCB"
"3-6-6 Unit Mechanism".
NO2 FH M3.0x6 (NI)
7
Plate Hinge R
3 Cover Steel R
3-19
Connectors".
"3-6-7(1) "Unit Power
BH M3.0x5K
4
Cover Steel Rear
5
4 BH M3.0x5K
4 BH M3.0x5K
Label Caution
(CHINA)
Label Rating
1 BH M3.0x5K
CL-E720DT