General Specifications - Citizen CLP-621 Technical Manual

1-1. General Specifications

Printing
Printing method
Resolution
Max. print width
Max. print length
Print density
Printing speed setting
Print mode
Batch mode
Tear off mode
1
Cut mode *
2
Peel mode*
Media
Types of media
Recommended media Thermal-transfer: label media (RP050 Ricoh)
Max. media width
Min. media width
Min. label width
3
Min. label pitch*
*1,*2: Options can be separately purchased.
*3: When a media pitch of less than 1" is used, set the "Small Media Adjustment" setting in
the "Page Setup" menu to "ON".
Thermal transfer/Direct thermal
Main scanning line density: 203 dots/inch (8 dots/mm) (CLP-621)
Sub-scanning line density: 203 dots/inch (8 dots/mm) (CLP-621)
Head 864 dots (effective dots: 832 dots) (CLP-621)
Head 1275 dots (effective dots: 1240 dots) (CLP-631)
104 mm (CLP-621)
105 mm (CLP-631)
812.8 mm
Print density is adjustable with software
4, 3 or 2 inches per second.
Normal printing (single or multiple sheets)
Feeds back media to the tear-off position after printing is completed.
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are available.
• Back feed
• Cut through
(Cut through refers to stopping present printing to cut the previous
label when it reaches the cut position. After cutting, printing restarts
but a gap may be created at the seam of the printing at this time.)
Peels labels from the liners after printing them.
Roll, fanfold
(continuous media, die-cuts, continuous tags, paper or tickets)
Direct thermal media: label media (140LAB Ricoh)
tag media (TB2E0V, Mitsubishi Paper)
118.0 mm
19.5 mm
19.5 mm
6.35 mm
1-3
1-1. General Specifications
300 dots/inch (11.8 dots/mm) (CLP-631)
300 dots/inch (11.8 dots/mm) (CLP-631)
4.1 inch
32 inch
4.65"
0.77"
0.77"
0.25"
CLP-621 & CLP-631