Lever Head Lock" And "Sa Main Plate R - Citizen CL-E720DT Technical Manual

(2) "Lever Head Lock" and "SA Main Plate R"

1. Remove the 3 screws (BH M3.0x4 (NI)) and detach the "SA Main Plate R".
2. Disengage the 1 E-ring (E-Ring 2.5), and remove the "Lever Head Lock" and "Spring Head
Lock" from the "SA Main Plate R".
Note on reassembling:
• When mounting the "Lever Head Lock", hook the "Spring Head Lock" as shown in the
magnified view on the above figure. Hook one end of the "Spring Head Lock" on the groove
of the "Lever Head Lock", and insert the other end into the hole in the "SA Main Plate R".
Also, mount the "Lever Head Lock" on the "SA Main Plate R" as shown below. Then, be sure
that the lever moves smoothly.
Lever Head Lock
Chapter 3 Disassembly and Maintenance
3-6. Disassembly, Reassembly and Lubrication
Lever Head Lock
Spring Head Lock
3-37
SA Main Plate R
BH M3.0x4 (NI)
E-Ring 2.5
CL-E720DT